Standard Specifications
Hull & Deck
• Modified deep-V hull w/sharp entry
• Vacuum-infused and post-cured, epoxy composite with biaxial E-glass and closed-cell foam core
• Solid E-glass and epoxy keel and transom corners
• Vinyl rub rail and ½" round stainless steel insert
• High-density core and/or solid E-glass at thru-hulls and under hardware
• Hull sides finished with Alexseal paint
• Single vinyl 3/8” cove stripe
• Single painted boot stripe
• White gelcoat deck with non-skid
• White epoxy painted bilges
• Underdeck storage
• Hull side boarding door and transom door into cockpit
• Stainless steel custom deck cleats (6)
• Retractable swim ladder
Bow & Cockpit
• Bow seating with cup holders and storage below
• Bow filler cushion
• Aft cockpit L-shaped seating with integrated storage
• Port cockpit serving bar with sink and refrigerator
• Stbd cockpit serving bar with integrated storage and trash bin conveniently placed behind pull door
Pilothouse
• Fiberglass Pilothouse with integrated glass system
• Opening forward windows - electrically controlled
• Tinted sliding glass side windows
• Aft enclosure with roll-up door
• Two overhead hatches with sliding screens and shades
• High-gloss teak ceiling accents with integrated grab handles
• High-gloss teak window valances with ambient backlighting, paired with premium roller blinds
• High-gloss finished teak drawers
• High-gloss teak dropleaf table, removable for use in either the bow, cabin or pilothouse
• Cushioned helm seats on telescoping swivel bases
• Ultraleather upholstered seating with convenient under seat storage
• Cupholders
• Premium synthetic teak decking
Interior
• Enclosed head to port with faucet-integrated pull-out shower
• Solid surface countertop with integrated sink
• Cherry vanity cabinets, drawers, and towel ring
• Premium synthetic teak decking
• Satin finished cherry paneling and trim
• Changing room and dry storage to stbd
• Two fixed portlights and two overhead opening hatches (head and changing room)
Helm
• Flush-mounted low glare glass dash panel with upholstered helm
• Compass
• LED Lightbar
• Stainless steel dual trumpet electric horn
• Garmin GPSMAP® 8612 plotter with 12" display with 12" display
• Garmin 315 Command Mic VHF with AIS and handheld remote at helm
• Depth and temp transducer
• Wireless charging pad
• Port and stbd navigation lights
• Mercury Vessel View display
Propulsion & Steering
• Choice of Twin Mercury Verado V8 300 HP or Twin Mercury V10 400 HP Verado Outboards
• Mercury electric steering
• Mercury joystick piloting with skyhook and auto-pilot
• 250 gallon vented, epoxy coated, aluminum fuel tank
• Stainless Edson destroyer wheel with high gloss teak rim
• Electro trim tabs
Systems
• 4kw diesel generator
• Air Conditioning system with reverse cycle heat (16,000 BTU)
• Fusion marine stereo system with one sub-woofer and six speakers
• 33 lb. anchor with 250 ft rode, 20 ft chain, and electric windlass
Electrical
• 12V DC system with breaker switches and LED voltmeter
• 120V AC system w/ 30A shore power inlet and 50' shore cord
• Charger/inverter with built-in automatic transfer switch, 3000w inverter, 120A charger and control display
• Two house batteries for a total capacity of 430 amp- hours and two 840 CCA start batteries
• Dimmable overhead LED lights in pilothouse, head, and changing room
• Courtesy lights in bilge and large storage lockers
• LED navigation and anchor lights
• 12VDC, 120VAC, and USB A/C charging ports throughout
• Bonded electrical system with galvanic isolator
Plumbing
• Two automatic bilge pumps with highwater alarms
• Electrically operated fresh water toilet with 24 gal. holding tank, marina pump-out & macerator discharge
• Gray water sump w/strainer and clear inspection port for shower and AC condensation
• 6 gallon hot water tank
• On-demand pressurized fresh water system
• Hot/Cold transom shower
Complimentary Owner Package - Standard
• Transport cover
• 16" teak burgee staff
• Complimentary owner orientation at MJM factory
• American flag with staff
• Vinyl name and hail port on back of aft seat prior to dealer delivery