$50,000 Price Reduction! Will not disappoint, beautiful boat, awesome equipment list and super clean!!
2014 Sabre 48 Salon Express, stored indoors at River Forest for 6 months during the summer months, powered with Cummins 550hp QSC8.3L 438 hours. All engines, pods and generator service completed June 2016 with service records available.
Extended warranties through November 2018 on Zeus pods
LED underwater lights
Flag Blue hull
Garmin (2) chartplotter package
Fusion stereo system
Split utility room / 3rd cabin layout with washer/dryer, custom mattresses in all berths
Extended salon settee interior with ice maker cabinet and double Stidds
Beautiful interior decor
Custom cockpit awning
Exterior cockpit Stamoid covers and transom cover
For additional information, please call the Listing Broker.
*Photos taken 11/02/16
Model: 48 Salon Express
Location: Fort Myers US
Vessel Name:The Maine Event
Designer:Kevin Burns - Head Designer
Model:QSC 8.3L 550hp
DIMENSIONS & WEIGHT
Draft - max:3.75 ft
Bridge Clearance:14.17 ft
Fresh Water Tank:160|gallon
Dealer, Factory and Custom Options
FRP molded mast, separate radar platform & satellite pads for sedan hardtop
Teak decking on swim platform
Teak decking in aft cockpit including steps
Inverter/charger 3000 watt true sine wave with remote control
Beam central vac system with (2) outlets and a 32' expandable hose
Dark hull color - Flag Blue
Anti-Skid color (fore & side deck) - Beige
Accord shades on opening ports
Reverso Oil Change system
Kahlnberg triple chrome horns
Kahlenberg horn controller M-485A
Hot and cold transom shower
Sal water wash down fore and aft
Fresh water wash down forward
Shore water inlet
CUSTOM FEATURES, LAYOUT CHANGES and OPTIONS
Install solid cherry doors on cabinet aft of galley sink in lieu of standard. Install wood shelf with fiddle half way up in cabinet. Keep the standard lighting
Add a door on the small cabinet forward of galley sink. Open up opening as wide and tall as possible, & remove fiddle. Keep the standard light
Build flat bottom in locker under cook top
Main Salon & Interior
Move double SS cup holder from Nav desk area and install outboard of mate seat (port) on window edge
Add single SS cup holder outboard of joystick
Increase main salon armrest another 4'' in height on both settees. Includes third armrest on forward end starboard extended settee
Install a fixed fiddle on forward end of nav desk the same length and location as hinge on fwd end of cover. Add another fixed fiddle between the chart and TV covers 32" length. Fiddle should end at the end of the nav desk cover. No inboard filled
Add a stainless handrail on vertical surface of the helm pod on the return section and a stainless one on the athwartships section of the vertical surface of the pod (ala CC005 except in Stainless). Delete std cherry hand rail replaced with SS handrail covered with Ultra-Leather
Add two cherry drop in boxes on port side of helm pod face one on top of the other. Top one to be rectangular with inside opening 6H"x8W"x10"D. Make the bottom cherry box as large as possible and install the std 12V outlet in this box
Replace standard single helm chair with two STIDD 500N-FA fixed height mounted on a cabinet. Cabinet top to be Hi-Gloss finish. STIDD seats only slide fore/aft, no height adjustment or swivel. Set in position 2" aft of the standard pedestal location now. Underside of STIDD seat frame to be 28" above sole. Install STIDD foot rests on the fwd face of the cabinet. Cabinet under seats to have an ice-maker
Reconfigure the galley air conditioning system to be the forward salon system. Increase size to 16K BTU. Add supply grill to top of chart table and tee some air to galley and utility space. Control panel is mounted next to existing salon control
Master Cabin & Head
Install a 26" TV with separate DVD in Master Stateroom. Install TV 47" from cabin sole
Install a tall mirror recessed (no frame) into the bulkhead behind master head shoji door
Silver Birch Corian counter and Glacier White sink in master head in lieu of cherry counter and vessel sink w/ vessel faucet. Add 3'' Silver Birch fiddle behind sink
Guest Cabin & Head
Head cabinet to be 1/2 fully open and the another 1/2 to have shelf with fiddle
Installed second cherry towel rack on inside of door, location 10'' below top of door
Two 12" stern cleats on coaming cap behind cockpit seat backrest, one on either side of the center rail stanchion
Delete standard teak toe rails. Install Skene chocks to forward cleats, same chocks as used on the SL47. Install 24" rub strakes at the 4 midship cleats. The strakes to be notched around the cleat bases
Install fresh water spigot in engine room
Shelf above house battery bank with fiddles on all four sides, rubber material base and removable
Relocate windshield washer fluid to more accessible location in engine room near water heater & water pump on the bulkhead
Single Seagull water purifier on at galley sink with spigot with y-connection to ice-maker
Washer/dryer combo installed in crew cabin to starboard with custom bureau to port. Make a washer/dryer cabinet to cover sides and top only, no door. Make top of washer/dryer cabinet a continuous cherry top across custom tall bureau. Washer/dryer sits down on FRP next to berth. Install standard crew cabin mirror behind units and move CO detector and switches to other location
Install 120V outlet inside chart storage locker, with notch in cover, aft and outboard, for opening for wires to pass through, no thumb hole
Custom utility room with berth, workbench w/3 drawers and pantry with adjustable shelves
Ocean LED underwater lights - blue
Custom 7" Latex with 2" pillow top mattress in master and guest staterooms, crafted by Portland Mattress Makers
Custom 7" Latex mattress for utility room, crafted by Portland Mattress Makers
Garmin Electronics Package - Two 15" Color multi-function displays, 4' open array 4kW radar, depth sounder w/ bronze thru-hull, VHF radio w/ 8' Antenna, CMD Zeus autopilot with full integration, SkyHook
Fusion 700 stereo w/ 4 speakers and two remote control pads
Switch controls for horn, running lights, anchor light, engine room blower and optional equipment
Stazo 400mm custom teak steering wheel with tilt helm and Sabre logo
Stidd single helm seat with Ultraleather fabric
Twin Cummins QSC 8.3 550 hp electronic, fresh water-cooled engines.
Twin CMD Zeus 3800 pod drives, with integrated steering and trim
120A, 12V alternators each engine.
(2) Exhaust by-pass mufflers.
Engine room blower.
Engine room vent ducts.
Engine room floor with FRP anti-skid.
White gelcoated engine room
Mylar face foam noise barrier.
(2) 250 USG diesel fuel tanks port and starboard
Racor fuel filters with water in fuel senders
(2) 2” “Diesel” deck fill plates
Steering and Trim Systems
CMD helm, with joystick.
Trim tabs integrated in CMD Zeus pod drives.
Autopilot integrated in CMD Zeus system.
“Skyhook” GPS position hold system with dedicated GPS receiver.
Fresh Water System
Water capacity 160 gals
Stainless steel, 20 gal. water heater, operates on 110-VAC or engine heat
Temperature control valve on hot water supply
Hot and cold water pressure system 12V
Fresh water spigot in engine room
Waste Water System
Polyethylene holding tank with 70 gallon capacity
Jabsco Quiet Flush fresh water MSD in guest head
Tecma Eco MSD in master head
Diaphragm waste pump on holding tank
Single Kahlenberg chrome trumpet horn with compressor
Fire extinguishers, (5) at 2 1/2 lbs
Marelon sea valves on all thru-hull fittings below waterline
Bonding system to safeguard against galvanic corrosion
Automatic fire extinguishing discharge system in engine space with override
(3) Automatic 12V electric bilge pumps
(3) high water switches and alarm
2010 AB Inflatable 10VS hull# XMO08001A010 with Tohatsu 20hp
DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.