FOR SALE | 2002 Tartan 4100
Sold
Sold
Sold
Sold
Sold

(SOLD) 2002 Tartan 4100

Just Traded!!

This one owner 2002 Tartan 4100 was just traded to us and is in  Spectacular condition!

  • Leisure Furl Main sail system
  • Indoor heated storage every winter since New!
  • Two zone Air conditioning & Heat
  • Inverter
  • Professionally serviced and detailed, all records are available 
  • New Bottom job! Soda blasted, 5 layers of Barrier coat, 2 coats of Micron 66, also boot stripe freshly Awlgripped
  • New Main Halyard
  • All new Canvas, Dodger and Bimini top.
  • New Head system with all new hoses, Hybrid electric with fresh or raw water
  • All New Batteries 13'

SPECIFICATIONS

BASIC INFORMATION
  • Manufacturer:Tartan
  • Model: 4100
  • Year: 2002
  • Category: Sail
  • Condition: Used
  • Location: Portland US
  • Hull Material:Fiberglass
  • Designer:Tim Jackett
ENGINE
  • Make:Yanmar
  • Model:4JH3E
  • Engines(s):1
  • Hours:1500
  • Engine Type:Inboard
  • Fuel Type:diesel
  • Horsepower:42|horsepower
ACCOMODATIONS
  • Total Cabins:2
  • Total Berths:7
  • Total Heads:1
DIMENSIONS & WEIGHT
  • Length:41 ft
  • Beam:13.5 ft
  • Draft - max:5.33 ft
TANK CAPACITIES
  • Fuel Tank:50|gallon
  • Fresh Water Tank:100|gallon
  • Holding Tank:50|gallon

GALLERY

DESCRIPTIONS

Manufacturer Provided Description

Take the helm of the Tartan 4100 and feel the responsiveness of a yacht designed to soar through the waters. Now go below and discover her generous interior comforts. Blending pleasing aesthetics with a powerful profile, the T4100 is a yacht built for those wanting performance without the compromise.

Hull

NPG Isothalic gelcoat for superior gloss retention

• Epoxy hull laminate producing a strength to weight ratio not attainable in

any production polyester laminates

• Epoxy allows all uni-directional fabric laminate, no chopped strand mat

• Epoxy’s superior adhesive strength reduces overall hull weight while

increasing strength producing a faster and safer performance cruising

yacht

• Strict resin control through use of resin impregnation machine and

calibrated mixing equipment produces glass to resin ratio of 65% glass,

35% resin. (production polyester boats are typically 25% glass, 75%

resin=heavy and brittle)

• Superior fatigue and cyclic loading characteristics of epoxy ensure a hull

that retains its shape and strength longer resulting in higher resale value

• Extensive internal structure designed to carry rig and keel loads, glass

taped into hull using modified epoxy resin

• CoreCell linear polyurethane foam hull coring, provides lightweight

structure, stiffness, sound and thermal insulation and superior impact

resistance

• Hull is vacuum-bagged and structure is laminated in “one shot” thus does

not rely on secondary bonding of structural materials

• Hull is post-cure baked for 24 hours at 145 degrees increasing epoxy

laminate characteristics.

• Epoxy hull laminate is far stronger than any polyester laminate of similar

weight, i.e. greater safety margins while delivering superior performance

over normal production polyester hulls

• 90 degree throw, Marelon, flush thru hull fittings. Marelon fittings are UL

and ABS approved and are corrosion free

• Complete interior paintout for enhanced cosmetics and to seal interior

laminate surfaces

• Built to meet ABS Plan Certification

• Industry leading, non-prorated 15 year hull structural and blister

guarantee

• Warranty is transferable

 

Rudder & Steering System

 

• Console style rack and pinion steering pedestal

• 40” stainless steel Commodore wheel

• Stainless steel pedestal guard

• Single lever engine control with stainless steel handle

• 6” binnacle compass with stainless steel hood

• Engine controls mounted on pedestal for easy access and viewing

• High density, closed cell urethane foam rudder blade with modified epoxy

reinforced skins

• 4” diameter 1/2” wall thickness type 304 stainless steel rudder post

• High-density, low-friction rudder bearings

• Bronze rudder stuffing box

 

Interior

Structural fiberglass timbers bonded to hull to carry mast and keel loads

• Structural bulkheads bonded to hull

• Bulkheads and risers are pressure laminate or varnished cherry faced

marine plywood

• Hand fit varnished cherry trim throughout

• Solid stock raised panel varnished cherry cabinet doors with ventilation

slots

• Positive lock polished chrome cabinet hardware

• 1” solid stock raised panel varnished cherry passage doors in full cherry

framed jambs

• Polished chrome Mobella mortised door lock sets

• Solid stock varnished cherry cabinet faces throughout

• Tongue and groove solid cherry hull ceilings in forward stateroom

• Solid cherry face, dovetail joined, all wood drawers throughout

• Custom solid stock main salon table with inlaid Tartan logo and centerline

drawer storage

• Easy maintainance, varnished cherry battened overhead with strategically

placed access panels

• Varnished teak and holly cabin sole with extensive teak banded access

hatches

• Varnished teak handrails placed for security in a seaway

• Navy blue Ultra suede cushions

 

Electrical

 

• Batteries, 2 8D gel house batteries and 1 size 27 gel starting battery

• Freedom 10 inverter/charger

• Polished chrome and stainless steel interior lighting

• Automatic lights in hanging locker, liquor locker and refrigerator

compartment

• Service lighting in engine compartment

• Service lighting in cockpit lockers

• Directional reading lights at berths and main cabin settees

• Directional spotlights in galley and over main cabin table

• Recessed, dimmable overhead spotlights in cabin over head

• Interior courtesy lighting

• Cockpit and swim ladder courtesy lighting

• Dual 30 amp shore power services

• 50 foot shore power cord

• 110 VAC distribution panel prepped to accept gen set

• 110 VAC shore power outlets in each cabin, GFI protected

• 12 VDC metered distribution panel

• Battery selector switch

• Electrical bonding system

• Electric sump pump with automatic float switch for icebox and shower

drains

• Electric bilge pump with automatic float switch with manual override

• UL approved, stranded, tinned copper wiring for increased corrosion

resistance

• Wiring bundled in PVC conduit with additional conduit in place and

available for future installations

• All wiring is properly chafe protected where it passes through bulkheads,

liners and cabinetry

• ABYC color coded wiring throughout

• USCG approved navigation lights on bow rail, stern rail and mast

 

Galley

  

• 3 burner Force 10 gimbaled LPG stove with oven and broiler

• (1) 11 lb (5kg) LPG Tank

• LPG sniffer with automatic shut off

• Cherry faced cabinetry with raised panel access doors

• Cherry faced, dovetailed cutlery drawers

• 9” deep stainless steel double sinks with premium marine grade galley

faucet and manual foot pump with swivel spigot

• Granicote solid surface galley countertops

• Storage under galley sink through ventilated raised panel cherry doors

• Hinge out galley trash bin with cherry raised panel door access

• Molded icebox with Granicote solid surface counter top and 4” foam

insulation, insulated front and top load access

• Hot and cold pressure water with easy service access to pump and

plumbing

• Freshwater plumbing features polyethylene tubing and Whale mechanical

fittings

• All below water hose connections are double stainless steel clamped for

added security

• Premium marine grade hoses used throughout

• 100 gallons (378.5 l) of freshwater tankage with distribution manifold

• Forespar Marelon thru-hull fittings throughout, UL approved and

corrosion free

• Forward cabin vanity with sink, hot and cold water and Granicote solid

surface counter top

• 11 gallon (41.64 l) water heater, with engine heat exchanger and 110 VAC

 

Head

 

• Marine head with 20 gallon (75.7 l) holding tank w/deck pump out and

vent

• Y-valve with direct overboard discharge for offshore use

• Macerator pump for holding tank discharge for offshore use

• Snake river holding tank remote level indicator

• Premium marine grade sanitation hoses with low odor permeability

• Separate stall shower with Plexiglas enclosure, molded seat and teak floor

grate

• Shower drains to separate sump with automatic electric pump for overboard

discharge

• Premium marine grade head faucet and shower mixer

• Molded Granicote solid surface counter tops with integral sink

• Utility storage under sink through raised panel cherry door

• Hanging/wet locker outboard of shower seat

• Ample storage in upper vanity

 

Deck Hardware

 

• (2) Harken 53.2 STC (self-tailing chrome) primary genoa winches

• (2) Harken 40.2 STC (self-tailing chrome) aft house top-mounted winches

for sail controls and mainsheet

• (1) Harken 40.2 C genoa halyard winch mounted on mast

• 27” x 1 1/8” diameter, all-welded stainless steel stanchions, 4 hole

mounting base with backing plate installation

• 27” x 1 1/8” tube double stainless steel bow rail with rail-mounted

combination navigation light

• 27” x 1 1/8” tube double stainless steel split stern rail with rail mounted

navigation light

• 7 x 19 double lifelines with port, starboard, and stern boarding gates with

pelican hooks

• Custom designed and fabricated stainless steel stem fitting with integral

double bow roller

• Custom fabricated rail mount chocks for bow mooring cleats

• Stainless steel 10” bow mooring cleats with backing plate

• Custom fabricated mid mooring chocks with 10” stainless steel mooring

cleats, installed with backing plates

• Stern stainless steel quarter caps

• Stainless steel 10” aft mooring cleats

• 2” x 1 1/2” teak toerails through-bolted to 6060 T6 aluminum bar in hull

flange

• Teak taffrail

• Polished stainless steel toerail mounted genoa track with eye slides, for

outboard trimming of genoa when reaching

• Inboard Harken adjustable lead genoa tracks with wide sheave cars

• (3) Harken aluminum winch handles

• (8) Spinlock rope clutches for aft sail control leads

• Harken stacked double aft lead control blocks

• Harken turning blocks at base of mast for aft sail control leads

• Five-part Harken mainsheet system led to housetop self-tailing winch

• Harken traveler with six-part tagline adjustment led to aft end of housetop

for easy adjustment

• Custom stainless steel mast collar with multiple attachments for blocks

• Polished chrome 4” dorades on teak dorade caps

• (2) Stainless steel dorade guards

• Companionway hatch sea hood with instrument pod

• 6” binnacle compass

• Split anchor locker lid with latch

• CE unlimited offshore approved stainless steel deck hatches

• CE unlimited offshore approved stainless steel port lights

• On deck drains to waterline discharge, eliminates hull streaking

• Extensive housetop teak handrails

• Manual cockpit mounted bilge pump

• Drink holders in cockpit

• Offshore ready, match molded, and gasketed cockpit seat hatches

• Electrically lowered swim platform with a retracting stainless steel ladder

 

Spars and Ringing

Mast:

• Aluminum mast for greater strength, lower weight,

increased safety margins and improved performance

• White AwlGrip coated double spreader design

• Tapered mast section for reduced weight aloft

• Tapered airfoil swept spreaders

• Custom designed aluminum masthead with sheaves for 2 headsail halyards,

2 main halyards and spinnaker crane

• 1 x 19 Stainless steel wire rigging with forged turnbuckles

• Mast to deck tie rod to carry running rigging loads

• Custom designed stainless steel chainplate system ties to extensive internal

FRP structure and hull

• Masthead anchor light

• Steaming light with foredeck illuminator

• Mast wiring conduit

• VHF wiring for masthead antenna

• Spartite mast sealing and chock system

 

Accommodations

 

• Forward cabin with vanity and sink, extensive lockers, hanging locker and

dovetail drawers

• Approximately 80” x 60” berth in forward cabin with quilted mattress

• Furniture grade main cabin settees and seats with contoured cushions

• Main cabin fit with cherry cabinets and ventilated raised panel doors

throughout

• Through bulkhead raised panel ventilation door to forward cabin

• Large storage outboard of main cabin seat backs

• Varnished, drop leaf, solid stock cherry table with center storage bin and

two dovetail drawers

• Forward-facing navigation station to starboard

• Navigation lockers with installation space for extensive electronics

• Aft cabin with a full-width 88” x 63”double berth, hanging locker and

shelves

• Storage below berths

• Cockpit seat locker to starboard

• Cockpit lazarette hatches port and starboard

• Propane gas bottle storage in cockpit for two 11 lb (5 kg) tanks

 

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Get Brochure

Fill out the form below to download the PDF brochure for 2002 Tartan 4100

Thank You!

Click here to download the brochure

Download Brochure

Thank You!

We have received your request and a representative will contact you shortly.