SOLD | 2006 Sabre 386
Manufacturer Provided Image
Manufacturer Provided Image
Manufacturer Provided Image
Manufacturer Provided Image

(SOLD) 2006 Sabre 386


2006 Sabre 386 with shallow draft wing keel

Comes to market from her original owner.

Immaculately maintained 

Awl-gripped blue hull

A perfect blend of



Logical Details



A must see boat, ready to sail.

(She is currently, hauled and winterized)

Located in Glen Cove, New York

Please call with any questions. 


  • Manufacturer:Sabre
  • Model: 386
  • Year: 2006
  • Category: Sail
  • Condition: Used
  • Location: Glen Cove US
  • Vessel Name:NAMASTE
  • Hull Material:Fiberglass
  • Designer:Sabre Design Team - Jim Taylor Yacht Designs
  • Make:Yanmar 4JH3-TBE
  • Model:Yanmar 4JH3-TBE
  • Engines(s):1
  • Hours:
  • Engine Type:Inboard
  • Fuel Type:diesel
  • Horsepower:40|horsepower
  • Total Berths:7
  • Total Heads:1
  • Length:38 ft
  • Beam:12.67 ft
  • Draft - max:6.75 ft
  • Bridge Clearance:56.33 ft
  • Fuel Tank:40|gallon
  • Fresh Water Tank:90|gallon
  • Holding Tank:40|gallon



Sail Area IJPE : 763.00 sq ft I : 51.83 ft J : 15.00 ft P : 45.33 ft E : 16.42 ft Working Sail Area : 763.00 sq ft

Keel Details

Keel #1 Keel Type: Bulb Ballast: 6028 lb Displacement: 17250 sq ft Max Draft: 5.50 ft

Manufacturer Provided DescriptionThe Sabre Design Team and Jim Taylor Yacht Design have again joined forces to create a new Sabre sailing yacht. As her design evolved, the desire for luxurious accommodations, blended with great performance characteristics, rose to the top of the list of priorities. Her performance is assured by the pedigree of her designers who's successes are already well known. And as to her luxurious accommodations, Sabre's reputation for building high quality sailing yachts since 1970 should assure any sailor of the quality and integrity of her build.

Additional Features

- Fully equipped tool kit. - 3 type A, B, C fire extinguishers - Louvered main cabin locker doors. - Cockpit locker light. - Marelon thru-hulls and seavalves. - Hoses greater then 1" diameter that are below the waterline are double clamped.  - Propane 2 burner stove with oven and gas sniffer. - Hot and cold pressure water. - Varnished interior cherry finish with teak and holly cabin sole. - Dovetailed drawers. - Automatic electric and 1 manual bilge pump.


- Aluminum, keel stepped, mast with double swept airfoil spreaders, mast-head rig with white Awlgrip finish. Internal main and genoa halyards. - Prewired with VHF radio cable.


Additional Description- Scandvik polished stainless steel double galley sink. - 6'4" headroom. - Forward cabin contains two 6'8" v-berths. - Main cabin contains a 6'5" settee berth to port which converts to a double. - Aft cabin with double berth. - Aft head with separate stall shower. - Forward cabin equipped with vanity sink. - Quiet Flush head.

Additional Description- Three 12 volt 110 amp group 31 deep cycle marine batteries. - 50 foot shore power cord with GFI protection. - Master AC/DC Bass 6200 marine circuit breaker panels. - All wiring is tinned, color coded and meets USCG standards.

Additional Description- Yanmar 40 hp - fresh water cooled diesel with 2.72:1 reduction gear. Electrical shut-off. - 12 volt 80 amp alternator. - 40 gallon custom aluminum fuel tank, deck filled, shut-off valve, vented and grounded. - Racor fuel filter/water separator. - Raw water intake strainer with wrench. - Four point engine mount system optimized to reduce vibration adn noise - Engine compartment exhause blower - Engine compartment light - Complete engine access through sound and heat insulated removable panels.

Additional Description

- Closed cell Divinycell PVC foam cored, hand-laminated fiberglass of alternate layers of mat knitted biaxial roving. - ISO NPG gelcoat. - Below waterline, Sabre technology is utilized, consisting of chopped strand glass and vinylester resin as a back up for ISO NPG gelcoat. - Internal deck to hull joint. - Molded in double boot and single cove stripes. - Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength. - Step transom


- A modern NACA section fin keel cast in lead with antimony added for strength. - Thru-bolted to a reinforced hull keel sump with stainless steel bolts and bronze nuts.

DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Get Brochure

Fill out the form below to download the PDF brochure for 2006 Sabre 386

Thank You!

We have received your request and a representative will contact you shortly.