FOR SALE | 2005 Sabre 426
Sale Pending
Sale Pending
Sale Pending
Sale Pending
Sale Pending

(SALE PENDING) 2005 Sabre 426 | $290,000

2005 Sabre 426

This impressive Sabre 426 has been in fresh water ALL of her life.  She is currently in the possession of her original owners who had the boat built in 2005.  Your first impression will give you comfort and will display immediate signs of care, maintenance, improvements and upgrades over the years.  If you are in the market for a great sailing vessel that has wonderful accommodations, is well built and with obvious care and detail, we suggest you take a closer look here.

Featured equipment and notable improvements over the years:

  • 100% Fresh Water boat its entire life
  • Awlgrip painted hull 
  • Awlgrip painted deck (soft surfaces only)
  • Gelcoat anti-skid - excellent condition
  • Exterior teak finished with Awlwood - 2022
  • SidePower bow thruster
  • Espar diesel cabin heater
  • Upgraded house battery system - (5) LiFePO4 lithium batteries - Battle Born deep cycle 100Ah each 12 volt
  • Mastervolt charger / inverter system
  • Upgraded Raymarine electronics
  • Electric winches
  • Cockpit bimini
  • Cockpit dodger
  • Cockpit canvas connector from bimini to dodger
  • Companionway door with screens and window inserts
  • Varnished fold up table in cockpit
  • Aft cockpit shower
  • Lewmar electric windlass
  • Magma rail mounted BBQ grill - custom mount plate
  • Anchor washdown
  • Main sail cover
  • Helm pod pedestal cover
  • Winter cover and frame system

For additional details or to schedule an appointment to view her in person, please contact the Listing Broker.  Thank you.

SPECIFICATIONS

BASIC INFORMATION
  • Manufacturer:Sabre
  • Model: 426
  • Year: 2005
  • Category: Sail
  • Condition: Used
  • Location: Willsboro US
  • Hull Material:Fiberglass
  • Designer:Jim Taylor
ENGINE
  • Make:Yanmar
  • Model:4JH4E 55hp
  • Engines(s):1
  • Hours:
  • Engine Type:Inboard
  • Fuel Type:diesel
  • Horsepower:55|horsepower
ACCOMODATIONS
  • Total Cabins:2
  • Total Berths:2
  • Total Heads:1
DIMENSIONS & WEIGHT
  • Length:42 ft
  • Beam:13.42 ft
  • Draft - max:5.17 ft
  • Bridge Clearance:59 ft
TANK CAPACITIES
  • Fuel Tank:60|gallon
  • Fresh Water Tank:120|gallon
  • Holding Tank:60|gallon

GALLERY

DESCRIPTIONS

Cabins

  • Hand crafted interior joinery in American cherry
  • 6' 6" headroom in main salon and aft areas
  • 6' 4" headroom in forward cabin
  • Forward cabin has a 6' 10" long berth
  • Main cabin has (2) 6' 6" settee berths, port side will convert to double with a slight modification to the pull out berth configuration
  • Aft-cabin with 6' 10" long, full width double berth
  • Ample drawers in cabins galley and main salon
  • Drawer boxes are made of solid Maple and have dovetailed corners
  • Flat panel passageway doors
  • Large, cedar lined hanging lockers in forward and aft cabins
  • Optimized area for instrument installation, storage locker space and panel arrangement at the chart table
  • Locker doors are louvered

Galley

  • Force10 3-burner propane stove and oven
  • Xintex propane fume detector
  • GE Microwave oven
  • Sea Frost cold plate refrigeration system
  • Side by side stainless steel sink
  • Cabinetry storage above and below throughout

Navigational Electronics

  • Raymarine Hybrid Touch MFD
  • Raymarine autopilot
  • (3) Raymarine 4" MFDs - wind, depth, water temp, water speed, LAT/LON
  • ICOM IC-M502 VHF radio at nav station
  • ICOM Command Mic VHF radio at helm pod

Additional Features

  • Awlgrip painted hull 
  • Awlgrip painted deck (soft surfaces only)
  • Gelcoat anti-skid - excellent condition
  • Exterior teak finished with Awlwood - 2022
  • SidePower bow thruster
  • Espar diesel cabin heater
  • Cockpit bimini
  • Cockpit dodger
  • Cockpit canvas connector from bimini to dodger
  • Companionway door with screens and window inserts
  • Varnished fold up table in cockpit
  • Aft cockpit shower
  • Lewmar electric windlass
  • 45# Stainless Spade Anchor
  • 50' Stainless anchor rode 200' 8 plait
  • Magma rail mounted BBQ grill - custom mount plate
  • Anchor washdown
  • Main sail cover
  • Helm pod pedestal cover
  • Sink in aft cabin
  • Winter cover and frame system

Electrical

  • Single 30A shore power service
  • (2) 50' 30A shore power cords
  • AC/DC distribution panel at nav station
  • Main AC breaker located in port lazzarette
  • (5) LiFePO4 lithium house batteries - Battle Born deep cycle 100Ah each 12 volt
  • (2) Group 31 bow thruster batteries
  • (1) Group 31 engine start battery
  • Balmar 100A alternator with Balmar charger controller
  • Mastervolt inverter / charger
  • Mastervolt monitoring display at nav station
  • Simarine PICO battery monitoring system at nav station
  • (2) Solbian Flex 118Q solar panels on dodger
  • Victron solar controllers
  • Sea Frost 12V refrigeration system in galley
  • 120V hot water system
  • 12V cabin fans
  • 12V TV antenna
  • 12V ProMariner ProSafe polarity monitor at nav station
  • 12V interior lighting throughout
  • House battery On/OFF switch at nav station
  • Inverter battery ON/OFF switch at nav station
  • Lewmar thermal breaker for winches at nav station
  • Lewmar thermal breaker for windlass at nav station

Mechanical

  • Yanmar 4JH4E 55hp diesel engine
  • 100A alternator
  • 60 gallon aluminum fuel tank, vented and grounded
  • Racor fuel filter/water separator
  • Engine oil drip pan
  • Flexible four point engine mount system to minimize vibration and noise
  • Complete engine access provided by sound and heat insulated removable panels
  • Fuel gauge mounted at helm
  • 1 3/8" Aquamet prop shaft passes through a fiberglassed in log
  • PSS dripless shaft seal with bronze strut and three blade sailor propeller
  • Fresh water gauge at nav station

Structure

  • Awlgrip painted hull
  • Awlgrip painted deck (soft surfaces only)
  • Gelcoat anti-skid - excellent condition
  • Vacuum bagged, Divinycell cored structure hand laminated with structural E glass
  • ISO NPG gelcoat
  • Inward turning deck to hull joint with integral teak toe rail
  • Bulkheads, berth faces, shelves and floor stringers laminated to hull to provide additional structural reinforcement
  • Step transom
  • Deck is fastened to the hull using stainless steel through bolts
  • 3M 5200 Polyurethane sealant in hull / deck joint

Spars, Rigging, Sails

  • Mast - painted aluminum rig
  • 1 x 19 stainless steel rod and hydraulic adjustable backstay
  • Paint aluminum mast spreaders
  • Chain Plates - through deck stainless steel plate bolted to fiberglass hull points and plywood bulkheads
  • Running Rigging - Yacht braided
  • Primary Winches - (1) Harken #64 powered, self tailing, (1) Harken #64 self tailing 
  • Secondary Winches - (2) Harken #44 power, self tailing, (2) Harken #44 self tailing
  • Harken roller furling headstay
  • Main - new 2016
  • Roller Furling Jib - new 2016
  • Spinnaker - great condition 

Sails

  • Main Sail 2016 - very good condition
  • Roller Furling Jib 2016 - very good condition 
  • Cruising Spinnaker - very good condition 
  • Sail Areas
  • I : 56.5 ft
  • J : 16.6 ft
  • P : 49.5 ft
  • E : 17.5 ft
  • Working Sail Area : 920.00 sq ft

Keel Details

  • Keel Type: Wing
  • Ballast: 8650 lb
  • Displacement: 24500 lb
  • Draft: 5' 2"
  • Spare rudder

DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Get Brochure

Fill out the form below to download the PDF brochure for 2005 Sabre 426

Thank You!

Click here to download the brochure

Download Brochure

Thank You!

We have received your request and a representative will contact you shortly.